Request list

is empty

You are here

DL-1000X Data Logger

The DL-1000X is a high precision data logger designed to provide measurement and control for a wide variety of applications. Its reliability and ruggedness make it an excellent choice for remote environmental applications, including weather stations, mesonet systems, wind profiling, air quality monitoring, hydrological systems, water quality monitoring, and hydrometeorological stations. This low powered instrument features multiple capabilities including sensor measurement, direct communication and telecommunications, data analysis, ability to control external devices, and onboard nonvolatile storage — just to name a few.

Low Power, High Capability .

Additional features of the DL-1000X data logger include:

  • Setup easily with PC software, USB, and ethernet connectivity. The DL-1000X is internet ready.
  • Support sensor measurement, data processing and analysis routines with the onboard, BASIC-like programming language.
  • Save money and space with the DL-1000X’s microSD card drive for extended memory requirements.
  • Ease your mind with knowledge that electronics are RF shielded by a unique sealed, stainless-steel canister.

 

 

 

General Specifications

CPU - 32 bit with hardware FPU, running at 100 MHz
Internal Memory - 128 MB flash and 4 MB battery-backed SRAM
MicroSD Drive - Extended data storage up to 8 GB
Clock Accuracy - ±3 min per year, optional GPS correction to 10 μs
Connection -  USB micro B - for direct connection to PC—2.0 full speed, 12 Mbps
RS-232/CPI - Port for terminal expansion
CS I/O Port - for connection to communications and displays
10/100 Ethernet RJ45 - for LAN connection
Supported Protocols - PakBus, Modbus, DNP3, NTCIP, NMEA 0183, and many more
Removable Power Terminal - For connecting BPALK, PS150, PS200, or other power supply
Switched 12 V Terminals - Two Switched 12 V Terminals for powering sensors or communication devices, 1.3 A @ -40°C, 0.47 A @ 80°C
Power Drain - Power Drain @ 12 Vdc: < 1 mA (idle), 1 mA (active, 1 Hz scan), 55 mA (active, 20 Hz scan), active + 25 mA (RS-232/RS-485), active + 48mA (Ethernet link)
Sensor Excitation - Four Sensor Excitation (VX1 - VX4) for sensor excitation or regulated supply
Ground Terminal - 100 Ohm Resistive Ground Terminal for measuring 0 to 20 mA or 4 to 20 mA outputs
Analog Input Terminals - Analog Input Terminals (SE1 - SE16)
•16 single-ended or 8 differential inputs with ±5000 mV ranges
•24 bit ADC
•Ratiometric Bridge
•Thermocouple
•Period Averaging
Pulse Counting Terminals - Two Pulse Counting Terminals (P1, P2)
•Switch closure
•High frequency counter
•Low level AC
•High frequency counter
Control Terminals - Eight Control Terminals (C1 - C8): C terminals are software configurable for digital functions. Digital I/O functions consist of 5 V output and 3.3 V input logic levels for:
•SDI-12
•Serial communication Tx/Rx pair
•High frequency counter
•Switch closure
•General status/control
•Voltage source 5 V: 10 mA @ 3.5 V
•Interrupts
Analog Accuracy - ±(0.04% of measurement + offset)
Effective Resolution - 0.02 μV RMS
Weight - 0.86 kg (1.9 lb)
Dimensions - 23.8 cm x 10.1 cm x 6.2 cm (9.4 in x 4.0 in x 2.4 in)

 

Documentation